Part 1: English Speaking & Writing Test Introduction

PTE Author
PTE Author
Image- study group 800px
Reading time: 5 minutes

Part 1 of PTE Academic will take 77-93 minutes and will test your speaking and writing skills.

To test speaking skills, you will be assessed on your ability to produce spoken English in an academic environment.

Your writing skills will be assessed by giving written responses in academic English using correct grammar, spelling, and structure.

Personal Introduction

First, you will be asked to give a personal introduction to give some information about yourself.

You will have 25 seconds to read the prompt and prepare your response. You will only have 30 seconds to record a response and can only record this once.

Don’t worry, your personal introduction is not scored but will be sent together with your score report to the institutions selected by you.

For the speaking and writing test, there are seven types of questions that you will be scored on. Below, we will break down each part of this section of the test.

Read Aloud

The first question type to test your reading and speaking skills will be the Read Aloud assessment. In this test there are 6-7 questions.

You will be shown a text prompt that will be up to 60 words. You will have 30-40 seconds to prepare by reading the passage. You will also have a set time to read aloud, which will vary by item, depending on the length of the text.

To complete the question, speak clearly and straight away after you hear a tone. You must finish speaking before the progress bar on the screen reaches the end.

You can receive a maximum of 3 points for the content spoken, a maximum of 5 points for oral fluency, and a maximum of 5 points for pronunciation.

Repeat Sentence

The second question type is Repeat Sentence, which will test listening and speaking skills.

You will listen to a recording between 3-9 seconds and are given 15 seconds to answer.

Once the microphone shows as recording, you will need to speak straight away and say all the words that the speaker uses, in the same order.

For this question, you can receive a maximum score of 3 for content, a maximum 5 for oral fluency, and a maximum of 5 points for pronunciation.

Describe Image

The third question type will test speaking skills by describing an image. There are 6-7 questions.

You will be shown an image and have 25 seconds to study the image and prepare your response. For this task, use the Erasable Noteboard Booklet to take short notes.

After a short tone is heard, start speaking straight away. You will have 40 seconds to answer and must finish speaking before the progress bar reaches the end.

In this question type, you can receive a maximum of 5 points for content, a maximum of 5 points for oral fluency, and a maximum of 5 points for pronunciation.

Re-tell Lecture

The fourth question type, Re-tell Lecture, will test your listening and speaking skills. There are 3-4 questions in this test.

You will be given a prompt of up to 90 seconds and will have 40 seconds to answer.

Audio will be played straight away and you may also see an image related to the audio. While you are listening use the Erasable Noteboard Booklet to take short notes.

Once the audio finishes you have 10 seconds to prepare. To complete the task, in detail, you will need to cover the situation, characters, aspects, actions, and developments given in the recording.

You can receive a maximum score of 5 points on content, a maximum of 5 points on your oral fluency, and a maximum of 5 points for pronunciation.

Answer Short Question

The fifth question type, Answer Short Question, will assess listening and speaking skills. There are 10-12 questions in this test.

Here, you will be given a prompt of 3-9 seconds and will have 10 seconds to answer the question.

You will be required to answer a short question with a clear, simple, single word or a few words. This will not test general knowledge, it will simply test your vocabulary.

You will receive 1 point per correct word. No points are given for no response or incorrect response.

Summarize Written Text

In the first question type in the writing section, you will be required to Summarize Written Text, which will test reading and writing skills.

You will read a text of up to 300 words and have 10 minutes to write your summary. You will do 2-3 of these questions depending on the combination of tasks in the given test.

In this assessment, you must write just one sentence. Try using the Erasable Noteboard Booklet to take notes of the main points.

Make sure to include the main points of the text in a full, single sentence of no more than 75 words.

You can receive a maximum score of 2 points for content, maximum 1 point for the formal requirements, a maximum of 2 points for grammar and a maximum of 2 points for vocabulary.

Essay

The last question type of the Speaking and Writing Test will test writing skills.

In this question type, you will be provided with 2-3 sentences of text prompt and have 20 minutes to answer, by writing a 200-300 word argumentative essay on a given topic.

Time management is important for this task as you will need to plan, write and proofread your essay.

In this question, there are many parts where you can receive points. You can receive a maximum of 3 points for the content, maximum of 2 points for the formal requirements and maximum 2 points for development, structure and coherence.

You can also receive a maximum score of 2 points for grammar, maximum 2 points for general linguistic range, maximum 2 points for vocabulary range and a maximum of 2 points for no spelling errors.

There is a total of 15 points that you can pick up in this question type.

What's next?

Read more about Part 2: Reading Test Introduction.

Want more prep ideas?

Plus, explore Smart Prep, which combines all our practice materials in one place, so it's easier for you to stay on track with your PTE preparation.

  • Smart Prep is a clear path to test day, guiding you through the official paid and free resources available for your test

  • It can be accessed whether you’ve booked a test or not – just create, or sign in to your myPTE account

  • Preparation materials include guided practice tests, introductory videos, video courses and test tips.

Ready to get started?

Related Content

  • Which English tests do universities accept for international students?
    Reading time: 5 minutes

    You are preparing applications and need to confirm which English proficiency evidence universities will accept. This guide explains the main English language proficiency tests commonly recognised by higher-education institutions worldwide and highlights where test variants or immigration rules can change acceptance.

  • How to choose the best English test for US college admissions
    Reading time: 4 minutes

    Applying to a US college as an international student means proving your English language proficiency. But with so many exam providers—PTE Academic, TOEFL, IELTS, and Duolingo—it can be challenging to decide which one fits your goals best. 

    The best test for US college admission depends on several factors: which exams your chosen university or college accept, your preferred format, budget, and how soon you need your scores. This guide walks you through each key step, helping you select the right test and prepare with confidence.

  • An image of a university in Australia
    Choosing an English proficiency exam for university admissions
    By PTE Author
    Reading time: 6 minutes

    Applying to university or college often involves meeting an English language requirement, which can feel high-pressure when deadlines and offers depend on a single result. The best English proficiency exam for university admissions is one that your chosen institutions formally accept and that fits your application timeline.

    Pearson Test of English (PTE) Academic is one such exam, designed and administered by Pearson to provide standardized, comparable evidence of academic English ability.

     

    How universities decide which English exams they accept

    Universities and colleges do not identify a single “best” English exam for all applicants. Instead, each institution selects a set of tests that meet its needs. It then sets minimum scores for each test that meet its language requirements. These scores are often set at program level, which means requirements may differ between undergraduate, postgraduate, foundation, or professional courses.

    Because these policies can change, you should always rely on official admissions pages rather than third-party summaries when confirming requirements.

    From a university’s perspective, an accepted test must produce results that are secure, verifiable, and comparable across applicants. This is why institutions focus on test design, scoring consistency, and reporting systems when deciding which tests to accept.

    Further reading:

     

    How test design affects how universities interpret results

    Test design matters to universities and colleges because it shapes what a score represents and how reliably results can be compared across applicants. Admissions teams need confidence that scores reflect an applicant’s ability to use English in a practical, academic context, and that they are produced under consistent and fair conditions.

    PTE Academic uses integrated tasks that assess multiple language skills together – such as reading and writing – which reflects how English is used in real-life university study. All speaking responses are recorded and assessed within the same computer-based session, rather than through a separate interview. This standardized design means institutions receive results that are easier to interpret and compare fairly.

    Further reading:

     

    Why scoring design matters for admissions decisions

    Scoring design is central to how universities interpret test results, because admissions teams need to compare applicants fairly across countries, test centers, and test dates, and be confident that their English language skills are measured consistently.

    PTE Academic uses automated scoring technology that analyzes features such as pronunciation, fluency, grammar, and vocabulary using consistent criteria. Responses that require additional checking are reviewed by trained experts to protect accuracy and test integrity. This blended approach exists to apply the same standards to every test, regardless of where or when it is taken.

    Results are reported on a scale of 10-90 (using the Global Scale of English) for overall performance and for each communicative skill. This granular level of detail allows institutions to set very precise score thresholds, mapped to the specific demands of their courses.

    Because scoring is centralized and common for every test, rather than assessed locally by an individual, results are easily comparable across all test takers.

    Further reading:

     

    How test delivery affects the application process

    Test delivery matters to universities and colleges because it determines how securely responses are captured, and how consistently the assessment is administered. PTE Academic is delivered entirely on computer at secure test centers, with all test activity conducted under the same controlled conditions.

    The full test is completed in a single session, with speaking, writing, listening, and reading all recorded digitally as part of one standardized process. There is no separate speaking appointment and no paper handling, which reduces administrative variation between test centers and test dates. Other English exams may use paper-based formats, remote delivery, or in-person interviews.

    While these approaches can work in different contexts, they can introduce additional administrative complexity or variability. For admissions teams, a single, computer-based delivery model makes it easier to verify and handle results across large pools of international applicants.

    Further reading:

     

    How results timelines affect university applications

    Application deadlines are fixed, which makes results timelines an important practical consideration. PTE Academic is designed to deliver results quickly after the test is completed, typically within 48 hours. Fast reporting allows you to confirm earlier whether you have met a university’s score requirement and to send official results without delay.

    PTE Academic supports electronic score delivery to institutions through a secure platform, which reduces administrative handling and helps admissions teams verify results efficiently. Most universities also require that English test scores are recent, often within two years of the application date. You should therefore consider both score validity periods and reporting timelines when choosing a test date.

    Further reading:

     

    How acceptance works across countries and institutions

    Acceptance depends on whether a university or authority has formally recognized a test for a specific purpose. PTE Academic is accepted by universities and colleges across major study destinations, including the United Kingdom, Canada, Australia, New Zealand, the United States, and in many other institutions globally.

    It is also accepted for certain student visa pathways where proof of English proficiency is required. Acceptance can still vary by program, even within the same institution. For example, professional degrees or pathway programs may list different score requirements than general academic courses. If an admissions page lists PTE Academic with a required score, that result is treated in the same way as any other approved English test for that program.

    Acceptance varies between universities, programs, and visa types. For a broader view of which English tests universities accept worldwide — including how requirements differ for student visas — see our guide on which English tests universities accept for international students. If you're applying to US colleges specifically, see how to choose the best English test for US college admissions.

    Further reading:

     

    What the end-to-end testing process looks like

    The testing process is designed to be standardized from registration to score reporting. You first register online, choose a test center, and complete identity and security checks. Then, on the day of the test, all tasks are completed in one sitting, with your speaking responses recorded digitally.

    After completion, your responses are scored through the centralized system, and results are released once quality checks are complete. You can then send official scores electronically to your chosen institutions, and institutions can check your score through a secure online portal. If you need to retake the test, the same standardized format and scoring process applies, which helps universities compare results fairly.

    Further reading:

     

    A short checklist before you choose an exam

    Before booking an English proficiency exam, it helps to confirm a few essentials:

    • Your chosen program lists the test as accepted and specifies a minimum score

    • Your planned test date allows time for score reporting and a retake if required

    • Your score will still be valid on the application deadline

    • You understand how official scores are sent to institutions

    Confirming these points early helps reduce last-minute risk and keeps your university application on track.

    Frequently asked questions

    What is the best English proficiency exam for university admissions?

    The best exam is the one your chosen universities or colleges accept and that fits your application timeline. Institutions focus on whether a test produces reliable, comparable results, not on ranking tests against each other. For a comparison of the main tests universities recognise, see which English tests universities accept for international students.

    Is PTE Academic accepted by universities worldwide?

    PTE Academic is accepted by 4,000 universities and colleges across major study destinations. Acceptance and required scores should always be confirmed directly with each institution.

    How are PTE Academic results scored?

    Results are generated using automated scoring supported by expert human review, which applies consistent criteria across all test takers and supports comparability for admissions decisions.

    How quickly are results available?

    Results are typically available within 48 hours of test completion, which supports timely application planning.

    Can I retake the test if my score is too low?

    Yes, you may book another test date and retake the exam, provided you allow enough time before university deadlines.